Table of Contents
Advertisement
Select an Installation Location
•
Select a location that adequately supports the
weight of the pump and lubricant, as well as all
plumbing and electrical connections.
NOTE: The mounting hardware (user supplied)
must be strong enough to support the weight of the
pump, lubricant, and all plumbing and electrical
connections.
•
Mount the pump in a location that allows for easy
access to the pump controls and fill port.
•
Mount the pump in a location that protects from
common hazards that could damage the pump.
Consider all road hazards the pump may be
exposed to when selecting a mounting location.
•
Do not mount the pump near the Diesel Exhaust
Fuel (DEF) exhaust pipe.
•
Use mounting brackets to secure the pump directly
to either the outside or inside of the lower truck
frame. Torque fasteners to 165 ft-lb (223.7 N•m), as
shown in F
. 8 to F
IG
IG
•
Secure the power cable to the mounting brackets
with panel mounts and zip ties.
NOTE: Mounting brackets (Part Nos. 25T767 and
25T567) are suitable for mounting on most truck
frames, and are available from Graco. Contact your
local Graco distributor for assistance with ordering
this part. See F
. 12, page 15 for bracket with
IG
pump dimensions.
3A5082N
. 11.
F
. 8: Inside Truck Frame Mount Installation
IG
(Kits 25T567 and 25T767)
F
. 9: Inside Truck Frame Mount Installation
IG
(Kits 25T567 and 25T767)
Pump
13
Advertisement
Table of Contents
