Structure And Parts - saro DA 388 GWS Operating Instructions Manual

Seite 25 von 32
Quick guide to handle installation:
Remove the handle and the two screws from the packaging.
Pull back the door seal on the side of the door, insert the screws into the
handle holes and tighten them with a Phillips screwdriver.
Squeeze the door seal to make sure it is tight.
Please refer to the specific instructions in the user manual of your product and
install the handle accordingly.
Installation of the ventilation panel:
Remove the ventilation cover and the 4 screws from the packaging.
Align the ventilation panel with the 4 screw holes on the underside of
the enclosure.
Use a Phillips screwdriver to tighten the screws and securely fasten
the ventilation screen.

STRUCTURE AND PARTS

09/23 SvN