Connection; Structure And Parts; First Commissioning - saro GTK 600 PRO Manual

Seite 22 von 29

CONNECTION

After extended transportation or significant tilting, the appliance should not be operated for the first 24 hours to allow the cooling
system to stabilize and the refrigerant to distribute evenly, avoiding any defects or malfunctions.
If the appliance has been moved or tilted at an angle less than 45 degrees, please wait for 2 hours before connecting it.
Before connecting the appliance, ensure that the voltage and frequency of the power supply match the specifications on the
nameplate. Using different voltages can cause the device to overheat.
Connect the appliance only to a grounded protective socket with a 230-volt power supply.
After connecting the appliance, wait for approximately one hour to allow the interior to cool sufficiently before loading it with goods.
In the event of a power outage or when the appliance is disconnected from the power supply, wait at least 5 minutes before
reconnecting and starting the device.
Starting the appliance immediately after shutting it down can cause the fuse to trip and interrupt the power supply. Additionally, it may
lead to compressor overload and damage.

STRUCTURE AND PARTS

Example: Model GTK 600 PRO

FIRST COMMISSIONING

Before first use:
Unpack the appliance, check for completeness, and place it in the designated location (See Appliance Placement). Clean the
appliance (See Cleaning). Connect the cleaned refrigeration unit (See Device Connection) to a 230 V power outlet. Only place your
goods in the appliance once the desired temperature has been reached. To save energy and prevent cold air from escaping, keep the
door open only for as long as necessary.
These models are equipped with a circulating fan that ensures cold air circulates inside. The spacing between the shelves and the
door is for air circulation. Therefore, when placing your goods, make sure the air can circulate freely and that no items obstruct the
fan. Distribute the goods evenly on the shelves.
07/23 SvN