Structure And Parts; First Commissioning; Operation - (Display) Setting - saro FKT 935 Operating Instructions Manual

STRUCTURE AND PARTS

FIRST COMMISSIONING

Before the first use:
Unpack the appliance, check that it is complete and set it up (see Setting up the appliance). Clean the appliance (see Cleaning).
Connect the cleaned cooling unit (see unit connection) to a 230 V socket.
Only when the desired temperature has been reached do you place your goods in the appliance.
OPERATION – (DISPLAY) SETTINGS
Digital temperature controller
Switch on
1. Make sure that the on/off switch is set to [O] and the mains plug is plugged in.
2. Switch on the unit [Ì].
3. The current temperature is displayed.
Operation via the display
1. Set temperature:
Press the SET key and the set temperature is displayed. Press the SET key for 4 seconds, the °C starts flashing.
Stand 05/23 SvN
Seite 20 von 25