Using Power Supply From Ac Outlet - Hitachi MP-EG1A Instruction Manual

Chapter 2
Set-up _ _ _ _ _ _ _ _ _ _ _
522
■
Using Power Supply from AC Outlet
You can also use power supply from any AC outlet
AC adapter/charger
(MP-AC IA)
DC power cord
Caution: Be sure to use the specified MP-
AClA AC adapter/charger to use
power supply from AC outlet.
0
Set the CAM/OFF/PLAY switch to OFF,
and connect one end of the DC power
cord to the DC IN jack of the MP-EG1 A.
If you use AC adapter/chargers
other than the MP-ACl
A,
fire or
electric shock could result.
oc-~,~ •
0
G
1
1
~
• Plug the AC
adapter/charger
into an AC outlet.
Core section POWER indicator
The red POWER indicator
e
Connect the other end of
the DC power cord to the
DC output jack of the AC
adapter/charger.
will light.
After use, close the lid for DC power cord
connection terminal, referring to the figure
If the POWER indicator of the AC adapter/charger
does not light, unplug the AC adapter/charger
from the AC outlet. Wait about 30 seconds, and
try again to plug it into the AC outlet. IF the
POWER indicator still does not light, it is possible
that the AC adapter/charger is faulty. Unplug the
AC adapter/charger from the AC outlet and con-
sult the store where you purchased the MP-EG 1 A.
reiow
~