Table of Contents
Advertisement
■ Recording
Still Pictures
*
If a still picture has been recorded, the remaining number of stor-
able stiff pictures
(REM)
which appears in the on-screen display
mat not decrease. See "Remaining number indicator of storable
stil pictures" on page 35
0
Set the CAM/OFF/PLAY switch to CAM.
Hold down the red button at the center of the switch and set the
switch to CAM. The image from the lens will appear on the
LCD monitor, and the MP-EGlA will enter the record pause
mode ("PAUSE" will appear).
e
Set the record mode indicator to "D
11
•
Press the REC MODE/THUMBNAIL button repeatedly until
the
"CJ"
still picture record mode indicator appears on the LCD
monitor.
Record Mode Indicator
e
Check that the interval indicator is off.
If
"INTERVAL" appears on the monitor, interval recording
will be made at the displayed "INTERVAL".
C)
Adjust the image size of subject.
Chapter 3
Recording
10/24/1997
11:30AM
Indicates that the MP-EG IA is in
the record pause mode.
REM 2000
,,
...
Check that "INTERVAL"
is not displayed.
REM 2000
,,
...
Press the ZOOMNOL button to adjust the image size of subject. Pressing T (tele) magnifies the
image, and pressing W (wide) makes it smaller.
*
See "Zooming" on page 31 for details of zoom.
*
When the ZOOMNOL button is pressed, the zoom bar will appear on the left end of the LCD monitor.
e
Record.
Press the REC button to start recording. The REC indicator wil'
The image at the moment the button is pressed will be recorded
as a still picture.
*
The shutter speed varies from 1/4 to 1/800 second automatically,
according to the brightness of subject. If the subject is dim, the
shutter speed will be a maximum of
1/4
second, so be careful of
camera movement.
RED color
10/24/1997
11:30AM
Advertisement
Table of Contents
