Recording Still Pictures At Intervals - Hitachi MP-EG1A Instruction Manual

Chapter 3
Recording _ _ _ _ _ _ _ _ _ _
■
Recording Still Pictures
at
Intervals
If
the interval recording has been set (see page 76),
you can automatically record still pictures at a speci-
fied interval.
* Check the free memory area on PC card and battery remaining
level.
* It is recommended that you use AC power supply.
0
Set the CAM/OFF/PLAV switch to CAM.
Hold down the red button at the center of the switch and set the
switch to CAM. The image from the lens will appear on the
LCD monitor, and the MP-EGlA will enter the record pause
mode ("PAUSE" will appear).
e
Set the record mode indicator to
11
D
11
•
Press the REC MODE/THUMBNAIL button repeatedly until
the
"D"
still picture record mode indicator appears on the LCD
monitor.
Record Mode Indicator
e
Check the interval.
Check that the INTERVAL setting time (30 seconds, 1 minute
or 5 minutes) appears in the on-screen display.
If "INTERVAL" does not appear, a MP-EGlA will not operate
interval (see page 33).
* See "Setting Recording Interval" on page 76 for switching the interva
0
Adjust the image size of subject.
PAUSE NORM
10/24/1997
11:30AM
Indicates that the MP-EG IA is in
the record pause mode.
NTERVAL REM 2000
w~
REM 2000
w~
Press the ZOOMNOL button to adjust the image size of subject. Pressing T (tele) magnifies the
image, and pressing W (wide) makes it smaller.
* See "Zooming" on page 31 for details of zoom.
*
When the ZOOMNOL button is pressed, the zoom bar will appear on the left end of the LCD monitor.
0
Record.
Press the REC button to start recording.
The image at the moment the button is pressed will be re-
corded as a still picture, and the interval counter will count
down. Each time the interval counter is reset to 0, still pictures
will be recorded automatically.
Pressing the REC button again stops interval recording.
RED color
*
When the CAM/OFF/PLAY switch is set to OFF, the interval recording will be released.
10/24/1997
11:30AM