Connecting To Your Personal Computer - Hitachi MP-EG1A Instruction Manual

Chapter 6
Using the MP-EGJA with Other Equipment _
■
Connecting to Your Personal Computer
There are two methods for connecting the
MP-EGlA
to your personal computer.
Connection with an exclusive ISA board:
For connection to an IBM PC/ AT compatible desktop personal computer, you need the ISA interface
kit.
* The exclusive transfer application software Pure Vi is stored in the CD-ROM packed with the MP-EG IA.
* The ISA communication driver is packed with the ISA interface kit.
MP-EGlA Connection Cable**
**The MP-EGIA Connection Cable
and ISA Interface Board are packed
with the optional MP-ADIIA ISA
interface !<it.
WARNING: The MP-EGlA Connection Cable must be connected to ISA Interface Board or
ECP Adapter.
If the MP-EG l A Connection Cable is connected to another jack, MP-EG l A may
be broken down.
Connection to ECP printer port: _ _ _ _ _ _ _ _
For connection to an IBM PC/ AT compatible personal computer with ECP printer port, you need the
ECP interface kit.
* Before purchasing the kit, make sure your computer can be set to the ECP (extended capabilities port) mode.
* The exclusive transfer application software Pure Vi is stored in the CD-ROM packed with the MP-EGIA.
* The ECP communication driver is packed with the ECP interface kit.
~
Computer connection cable**
fF
MP-EGIA Connection Cable** ECP Adapter**
To ECP printer port
** The MP-EG IA Connection
Cable, computer connection
cable and ECP Adapter are
packed with the optional MP-
ADE
l
A ECP interface kit.