Table of Contents
Advertisement
Chapter 8
Subsidiary Information
■ Cleaning
Be sure to turn the MP-EGlA off before cleaning it.
If dirt adheres to the LCD screen or lens :
Wipe it off with a soft, dry cloth. When cleaning the LCD screen, do not use force or strike it.
Do not wipe case with benzene or thinner :
The coating of case could peel off or the case could deteriorate. When using a chemical cleaning
cloth, follow the instructions for use.
Wipe off dirt on the case with a moist cloth which has been completely wrung out.
■
When Trouble Messages Appear
Various messages may appear when you are operating the MP-EG lA. Perform trouble-
shooting accordingly.
MEMORY IS ALMOST FULL
Free memory area of PC card is
small.
Stop recording, and delete unnec-
essary files to increase free
1 - - - - - - - - - - - - - - + - - - - - - - - - - - - - 1
memory area, or replace the PC
END OF MEMORY
No free memory area of PC card
INSERT CARD
PCcardisnotinserted,orPCcard
INVALID CARD TYPE
INITIALIZE CARD
- / - / -
-:-AM
(date/time digits flash)
CARD LOCK (flashes)
- . ..
that cannot be used with the MP-
EG IA is inserted.
PC card that cannot be used with
the MP-EG IA is inserted.
PC card which is not initialized
has been inserted.
The clock has not been set or the
built-in battery has discharged.
The temperature of PC card is too
high, because of extended use.
card.
Insert PC card, or replace it with
the MP-HD260A PC card.
Replace it with the MP-HD260A
PC card.
Initialize it (see page 84).
Charge the built-in battery (see
page 26) and set the date and time
(see page 24).
Tum the MP-EG IA off, leave it
for 10-20 minutes and wait until
the message disappears.
Advertisement
Table of Contents
