Recording A Still Picture With Audio - Hitachi MP-EG1A Instruction Manual

Chapter 3
Recording _ _ _ _ _ _ _ _ _ _
53§
■ Recording
a Still Picture with Audio
The MP-EGlA can record a still picture, followed by recording of audio.
0
Set the CAM/OFF/PLAY switch to CAM.
Hold down the red button at the center of the switch and set the
switch to CAM. The image from the lens will appear on the
LCD monitor, and the MP-EG IA will enter the record pause
mode ("PAUSE" will appear).
0
Set the record mode indicator to "r;J".
Press the REC MODEffHUMBNAIL button repeatedly until
the
"D"
still with audio record mode indicator appears on the
LCD monitor.
e
Adjust the image size of subject.
PAUSE NORM
10/24/1997
11:30AM
Indicates that the MP-EG IA is in
the record pause mode.
REM 0:15
,,
. .
Record Mode Indicator
Press the ZOOMNOL button to adjust the image size of subject. Pressing T (tele) magnifies the
image, and pressing W (wide) makes it smaller.
*
See "Zooming" for details of zoom.
*
When the ZOOM/VOL button is pressed, the zoom bar will appear on the left end of the LCD monitor.
C,
Start recording.
The way you record varies depending on the recording type
you set. (See page
74
for switching between
"NORM"
and
"CLIP".)
• When the recording function is set to "NORM" :
recording function
10/24/1997
PAUS 11 :30AM
Press the REC button. The still image at the moment the button is pressed will be recorded, and
audio will also be recorded.
When the REC button is pressed again, recording of the file will end.
• When the recording function is set to "CLIP" :
Hold down the REC button. The still image at the moment the button is pressed will be recorded,
along with audio.
When the button is released, recording of the file will end.
*
See "Switching the Recording Function Type" on page 74 for switching between NORM and CLIP.