GARDASOFT RC1 Series User Manual page 23

When the RC1xx is not being configured, the display shows the status of
the lighting output as shown below:
The RC1xx displays an error if a light is connected but no rating specified.
To configure the RC1xx from the front panel, press and hold SEL for 1
second. CH1 is displayed. You can then use the  and  keys to scroll
through the menu, pressing the SEL button to access the required set up
as shown in the table below:
Display Select to:
CH1 To set up an output channel.
Eth
Set up Ethernet access.
LOC Set up a key lock.
tES Factory test. Do not use.
FrE
Set up the internal trigger.
trg View the trigger status.
UAL
View the output current.
rAt Set the lighting rating.
RC1xx LED Lighting Controllers - User Manual
— 23 —