Paging; Paging Code Memories - Kenwood TM-732A Instruction Manual

3. PAGING
The function is useful for net operations or for
selectively calling an individual.
Example: When member 2 is called
F : 145.660MHz
Individual Code: 111
/ 145.660MHz
333 111
Code to Individual Code
be called
Display
Pat
OOOCalled me!! Si =)
es
S
F : 145.660MHz F : 145.660MHz F : 145.660MHz
Individual Code ; 222 Individual Code : 333 Individual Code: 444
Member 1 Member 2 Member 3
Normal operating procedure would require that you
make prior arrangements with all members of the
group/net, so that all interested parties know which
DTMF code will be used for individual/group calls, and
that everyone knows who uses which individual code.
Since the paging system makes use of a 3 digit code
(000 thru 999) you could have a very large group and
still have extra code groups available.
The paging function permits the 3 digit code of the
calling station to be displayed in the display to allow
easy identification of the calling station.
Ei ; PA Stores your own station code.
Simplified operating procedure
Set your individual DTMF code.
Select the desired operating frequency...
Enter the paging mode.
' 7
To call other stations To listen for a call,
1. Select the DTMF wait for the squelch
code for the distant to open.
station.
2. Transmit
3. Make the QSO.
3-1. Paging Code Memories
Seven different paging code memories have been
priovided.
_ | Paging Code
Automatically stores the calling station's code during
PO receive. Can be used to temporarily store the code
for the station to be called.
P1~P5 Stores group codes, and the codes of other stations.
65