Kenwood TM-732A Instruction Manual page 10

SECTION 1 Basic transmit/receive and memory operation.
FRONT PANEL KEYS, CONTROLS, AND LABELING
VFO:Variable Frequency Oscillator
This key is used to select the VFO mode. This
mode allows you to select the desired
frequency by turning the main tuning control or
with the UP/DWN pushbuttons on the
microphone.
MPV:
Pressing the F key momentarily and then this
key will copy the contents of the current
memory channel to the VFO.
Te oe ae
acer! F key n
MR: Memory Recall
This key is used to select the MR mode.
This mode allows you to select the desired
memory channel by turning the main
tuning control or with the UP/DWN
pushbuttons on the ynigiophone.
this key will write 'current i I
into memory.
MHz:
This key is used to select 1 MHz tuning
steps.
LOCK:
Pressing the F key momentarily and then
this key will disable all front panel keys
preventing accidental frequency shifts, etc.
| Tuning control:
Use this control to select the desired
operating frequency, memory channel, etc.
10
VOL: Volume
This control is used to
adjust the volume from
the internal and external
speaker (if used.)
Clockwise rotation will
increase the volume
and counterclockwise
rotation will decrease
the volume.
i
SQL: Squelch
the desired squelch
no signal is present.)
This control is used to select
threshold level. (Eliminates
the background noise when