Table of Contents
Advertisement
FleetSync:
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVC KENWOOD Corporation.
Note:
◆ This function is available only in analog operation.
◆ Ask your dealer for further information regarding the
NX-200S/ NX-300S.
S
(S
ELCALL
ELECTIVE
A Selcall is a voice call to a station or group of stations.
■ Transmitting (NX-200/ NX-300/ NX-200G/ NX-300G Only)
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press
•
On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT switch and begin your conversation.
■ Receiving
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received (NX-200/ NX-300/ NX-200G/ NX-300G
Only). You can respond to the call by pressing the PTT
switch and speaking into the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a group call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in
your fleet.
Enter a Fleet number to make a call to all units in the selected
•
fleet (Fleet call).
•
Enter an ID number to make a call to the selected ID in all
fleets (Supervisor call).
20
ALPHANUMERIC 2-WAY PAGING FUNCTION
C
ALLING
/
to select the station you want to call.
)
Advertisement
Table of Contents
