Kenwood TM-732A Instruction Manual page 19

Basic functions performed with the POWER key
Press and hold the indicated key while the power is
turned on.
Note: You must hold the key down until the
display turns on to the normal intensity. (About 2
or 3 seconds.)
Press and hold the VFO key and one of the following
keys and turn on the power.
Note: You must hold the keys down until the
display turns on to the normal intensity. (About 2
or 3 seconds.)
Key Function Page Key Function | Page
VFO/MPV VFO reset | 37 BAND SEL. V_| VHF band VFO reset | 37
Master Memory Reset off BAND SEL. U | UHF band VFO reset | 4
Enables/disables ALL LOCK .
MHz/LOCK Microprocessor Squelch control if no lock 50
is activated
The PF key can be assigned to the
ENTER function (for the DTMF 22
microphone only)
SHIFT/DTSS_ | DTSS code transmission time change 63 Ay
REV/STEP Channel display ON/OFF control. 52 |
LOW/DIM Time out Timer ON/OFF control. 34
External DTMF tone Remote Control 56
"fj
BAND. SEL | Signal Squelch ON/OFF control. 68
19