Paging Code Monitoring - Kenwood TM-732A Instruction Manual

Paging Code Monitoring
ect the desired operating frequency.
. Press the DTSS key until the Paging Mode indicator
appears in the display.
. When the proper code is received, your squelch will
open and you will hear an alert tone sequence
coming from the speaker. The display will indicate
the individual or group code of the calling station.
Stand by with individual code |
If the calling station transmits your individual call the
display will show Paging Mode Memory Channel 0,
and will display the ID code of the calling station.
(Example: Frequency: 145.660 MHz, calling station ID
code is 144.)
POWER
LOW
Om
= PYYY
Zero is displayed to indicate
your Station is being called.
Stand by with group code.
If the calling station transmits the group code, the
group code and the Paging Mode Memory Channel
Number that contains that code will display.
(Example : group code 789 is stored in Paging Mode
Memory Channel 5.)
ce
POWER
LOW
DM
9
This Paging Mode Memory Channel Number is
something other than O to indicate a group call
has been received.
Err will appear in the display if there is a problem in
code identification.
To increase efficiency we recommend cancelling the
paging mode after initial calls have been made to
prevent transmitting the Paging Code data each time
the PTT switch is depressed.
70