Kenwood TM-732A Instruction Manual page 18

Key Function
VFO/MPV Check program scan frequency limits.
MR/M Memory channel clear.
MHz/LOCK Enter the program scan frequency limit
Used the set the program VFO scan
CALL lower frequency. ot
Used the set the program VFO scan
SHIFT/DTSS upper frequency. 51
REV/STEP Automatic paging cancel. 67
LOW/DIM S-Meter squelch hysterisis selection. 30
Enables DTMF microphone remote 54
Press and hold the F key and then press one of the
following keys:
control
18
POWER
LOW
Dim
Press and hold the F key and the key indicated below,
and then turn on the power.
Note: You must hold the keys down until the
display turns on to the normal intensity. (About 2
or 3 seconds.)
Key Function
Assigns the ENTER function to the PF
pel key on the DTMF microphone.
VFO/MP V
MR/M Change the memory channel allocation.
CALL DTMF signal memory
SHIFT/DTSS | Tone alert selection
TONE/T.ALT | Musical frequency indication.
Increases the display intensity for 5
seconds after a key is pressed or a knob
is turned.
LOW/DIM