Maintenance - Project EV APEX-7.3 Instruction Manual

Maintenance

Troubleshooting
If fault occurs, users can check the fault information on the APP.
Fault Code on App
Electronic Lock Fault
Emergency stop fault
Abnormal CP voltage
Abnormal AC output contactor
Over current
Over voltage
Undervoltage
Electric leakage
Reverse connection of lin N
Anti Tamper Switch
Over temperature of charging
interface
Finding a Fault
1. Click on the three dots in the right corner of the screen.
2. On the drop down menu, click on faults.
3. Check the faults list to find out which fault is happening.
18
Solution
Set the electronic lock status to the correct
position. Or seek help from us.
Reset the emergency stop button.
Or seek help from us.
Seek help from us.
Seek help from us.
Reduce output current. Or seek help from us.
Wait for the grid voltage to return to normal.
Or seek help from us.
Wait for the grid voltage to return to normal.
Or seek help from us.
Seek help from us.
Correctly connect P and N lines.
Or seek help from us.
Wait for the anti tamper switch to return to normal.
Or seek help from us .
Wait for the temperature of charging interface to
return to normal. Or seek help from us.