Charging Mode And Operation - Project EV APEX-7.3 Instruction Manual

Charging Mode and Operation

Users can set three charging modes through the charging mode setting interface of
the APP: controlled, locked, plug and charge.
A. Plug & Charge
Charging will start automatically after EV plugged in. If you want to stop the charging,
just press the stop button on the side of the charger.
• Start Charging:
1. Set the charger to the Plug and Charge mode
2. Insert the charging plug into the EV
3. Charging session started
• Stop Charging:
Press the stop button on the side of the charger.
B. RFID
Initiate or cease charging by using APP or by swiping RFID card on this mode. You can
also use APP for Reservations.
The controlled mode with RFID card
• Start Charging:
1. Set the charger to the Controlled mode
2. Insert the charging plug into the EV
3. Swipe card
4. Waiting for authorizing
5. Charging session started
16