Project EV APEX-7.3 Instruction Manual page 12

The APEX App
Adding a chargepoint
1. Click on the add button, and scan the QR code or enter the serial number located
on the side of the chargepoint. Enter a nickname for the chargepoint. Your charger
will then appear on the screen as shown below.
Adding the chargepoint to a network
1. Click on the three dots in the right corner of the screen.
2. On the drop down menu, click on network.
3. Choose either WIFI or 4G depending on which unit chosen and enter details.
4. The charger will now be connected to a network.
12