Operation - Hilti TE 6-A36 Original Operating Instructions

Storage temperature
Battery charging starting temperature
4.2 Rotary hammer
Rated voltage
Weight in accordance with EPTA procedure 01/2003
Rated speed under no load
Single impact energy in accordance with EPTA procedure
05/2009
Drilling diameter range in concrete/masonry (hammer drilling)
Drilling diameter range in wood (solid)
Drilling diameter range in metal (solid-head drill bit)
4.3 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise values
Sound power level (L
WA
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration values
Hammer drilling in concrete
(a )
h, HD
Vibration emission value, chis-
eling in concrete (a
h, Cheq
Uncertainty (K)
5

Operation

5.1 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
*2100247*
)
)
WA
)
pA
)
pA
B 36/5.2
B 36/9.0
B 36/5.2
)
B 36/9.0
2100247
TE 6­A36
36 V
3.7 kg
1,050 /min
2.5 J
4 mm ... 28 mm
3 mm ... 20 mm
3 mm ... 13 mm
99 dB(A)
3 dB(A)
88 dB(A)
3 dB(A)
TE 6­A36
16.8 m/s²
16.2 m/s²
8.1 m/s²
7.5 m/s²
1.5 m/s²
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
TE DRS­6­A
12.7 m/s²
12.3 m/s²
•/•
•/•
1.5 m/s²
English 7