Replacing The Battery - Itronix X-C 6250 Pro Getting Started

increase its capacity. After this initial conditioning, maintain battery
capacity by deep cycling at the recommended frequency.
Use the Battery Maintenance application to perform deep cycle
discharges and update battery information. To access the Battery
Maintenance application, from the Start Menu, select Programs, select
the Mobile Computer Tools folder, and then choose Battery
Maintenance. For more information about using this application, refer to
its online Help.

Replacing the Battery

Replace the battery in your computer with a new one if the existing
battery does not hold a charge. If you have a drained battery, replace it
with a charged one.
When the computer is off, it is equipped with enough internal backup
power to maintain memory contents for about 10 minutes each time
you exchange batteries in the unit. This internal backup power begins
when you remove the existing battery and ends when you install a new
battery.
CA CA UTION UTION
CAUTION CA CA UTION UTION When the computer is operating on battery power, you
can lose data if you remove the battery while the computer is
operating. Turn off the unit by pressing
the battery.
You can also lose data if the battery is removed from the unit for
more than 10 minutes. Make sure you have a new battery on hand
before attempting to replace the battery.
79-0002-002 04/99
Section 3. Power Management
before you remove
FN+OFF
25