Startup Problems - Itronix X-C 6250 Pro Getting Started

X-C 6250 Pro Getting Started

Startup Problems?

If your computer does not operate, try these solutions.
• Connect the AC adapter to charge the battery if it is not charged.
• If the AC adapter is connected, make sure the electrical outlet you
are using works.
•
Check to make sure the battery is installed and charged properly.
•
Check the battery door latches to make sure the door is closed and
secured.
• If the computer does not turn on, restart the system by holding down
both mouse buttons for at least 10 seconds and then releasing the
buttons.
• If the battery doesn't begin charging, remove the battery, connect the
AC adapter, and turn on the computer by pressing
the battery. The indicator light blinks while the battery is charging.
Section 5, "Troubleshooting," lists additional solutions you can try.
8
. Reinstall
FN+ON
79-0002-002 04/99