Mouse - Itronix X-C 6250 Pro Getting Started

X-C 6250 Pro Getting Started

Mouse

The mouse pointer and buttons are located directly below the spacebar
on the keyboard. Apply light, downward pressure to the mouse in the
direction you want to move the pointer around the screen.
The X-C 6250 Pro computer uses a Liquid Crystal Display (LCD), which
is the type of screen used on many notebook-style computers. One of
the common problems experienced on computers with LCD displays is
that the cursor seems to "disappear" whenever the mouse is moved
quickly. To improve the visibility of the mouse cursor, you should:
•
Enable the "Pointer Trails" feature to add trailing cursors
•
Use a low or medium speed/sensitivity level
You can combine a higher level of acceleration with a slow or medium
speed/sensitivity level. This will allow you to move the mouse cursor
quickly by increasing your finger pressure, while still providing a finer
degree of control when you apply minimum pressure.
T T T T T o adjust the movement of the mouse o adjust the movement of the mouse o adjust the movement of the mouse o adjust the movement of the mouse o adjust the movement of the mouse
• From the Start menu, select Settings, Control Panel, and then choose
Mouse to make adjustments.
Do not attempt to reorient the mouse direction ("Reorientation" tab).
The mouse reorientation option is designed to be used in specialized
applications. It is not appropriate for use on this computer.
18 79-0002-002 04/99