Indicator Lights - Itronix X-C 6250 Pro Getting Started

X-C 6250 Pro Getting Started
• PC Car PC Card Sockets PC Car
PC Car PC Car
To remove a card, press the ejector button located to the left of each
socket.
• P P P P P ower P ower P ower P
ower Port ower P
to the computer.
• RJ-11 Connector RJ-11 Connector RJ-11 Connector This port is used by the internal modem to RJ-11 Connector RJ-11 Connector
communicate over standard voice grade telephone lines.
• Speaker Speaker Speaker Speaker Speaker Located on the bottom of the computer, the speaker
provides sound for the unit. Use the
adjust speaker volume.
• USB P USB P USB Port USB P USB P
connector.

Indicator Lights

Located below the display, these lights blink or remain on to indicate
activity on the system.
The On/Off light illuminates when you power on the computer; it blinks
to indicate a low battery.
The External Power light illuminates when external power is connected
to the computer. It blinks while the external power supply is charging
the battery and remains on when the battery is fully charged.
The Disk Activity light comes on when the hard disk is spinning or
processing data.
The Radio On/Off light illuminates when the radio modem is powered
on (if your computer is equipped with a radio modem). If the computer
is off and you receive a message, the light blinks to indicate a message
is waiting.
POWER ON / LOW BATT
14
d Sockets d Sockets These two sockets are used to connect PC cards. d Sockets
d Sockets
ort ort
ort This port is used to connect the external power supply ort
ort The Universal Serial Bus port is a series Type A USB ort ort ort
EXTERNAL POWER / CHRG
and keys to
FN+F6 FN+F7
RADIO ON / MESSAGE
HARD DRIVE ACTIVE
79-0002-002 04/99