Using A Stylus - Itronix X-C 6250 Pro Getting Started

Using a Stylus

If you have a touch screen, follow the guidelines below.
CA CA CAUTION CA CA UTION UTION UTION UTION
• Always use an approved stylus.
• Never use sharp, hard, or abrasive implements on the touch
screen such as ball point pens, pencils, or keys. They could
damage the screen.
•
To clean the touch screen panel, apply a household glass cleaner
to a soft, clean, dry cloth and wipe the screen.
T T T T T o use the stylus o use the stylus o use the stylus o use the stylus
o use the stylus
•
Slide the stylus out of its holder.
If you have a shoulder strap, you may have a slot on the strap to
hold the stylus.
• To replace it, slide it into the appropriate slot point first.
If you cannot select objects accurately with the stylus, you may need to
recalibrate the touch screen.
T T T T T o calibrate the touch screen o calibrate the touch screen o calibrate the touch screen o calibrate the touch screen o calibrate the touch screen
1 From the Start Menu, select Programs, Touch, and then choose
Touchscreen Controls.
2 Select the Calibration button.
3 Follow the instructions on the screen to calibrate the touch screen.
79-0002-002 04/99
Section 2. A Closer Look at the Computer
19