Remove The Trimmer Head; Transportation And Storage; Move The Machine; Store The Machine - GreenWorks ST40L412 Operator's Manual

EN
10.6

REMOVE THE TRIMMER HEAD

1. Put the metal rod (1) in the specified angle transmission
hole to fix the trimmer head.
2. Turn the trimmer head clockwise to loosen it. Do not
remove the spacer from the shaft.
English
11
Remove the battery pack from the machine before
tranportation and storage.
11.1
When you move the machine, you must:
• Wear gloves.
• Stop the machine.
• Remove the battery pack.
11.2
• Remove the battery pack from the machine.
• Make sure that children cannot come near the machine.
• Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
1
• Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12
Problem
The ma-
chine does
not start
when you
push the
trigger.
12
TRANSPORTATION AND
STORAGE
WARNING

MOVE THE MACHINE

STORE THE MACHINE

TROUBLESHOOTING

Possible Cause Solution
No electrical con- 1. Remove battery pack.
tact between the
2. Check contact and in-
machine and the
stall the battery pack
battery pack.
again.
The battery pack is Charge the battery pack.
depleted.
The lock-out but- 1. Pull the lock-out but-
ton and trigger are ton and hold it.
not pushed at the
2. Pull the trigger to start
same time.
the machine.