GreenWorks STG307 Operator's Manual
Hide thumbs
Also See for STG307:
- Operator's manual (15 pages) ,
- Operator's manual (44 pages) ,
- Operator's manual (44 pages)
Related Manuals for GreenWorks STG307
Summary of Contents for GreenWorks STG307
- Page 1 STRING TRIMMER OPERATOR MANUAL COUPE-HERBE MANUEL DE L’UTILISATEUR 24V 12" String Trimmer...
-
Page 10: Maintenance
English 4. Tighten the blade screws. ADJUST THE LENGTH OF THE CUTTING LINE LINE CUT-OFF BLADE While you operate the machine, the cutting line gets worn and shorter. You can adjust the length of the cutting line. This trimmer is equipped with a line cut-off blade on the guard. -
Page 11: Clean The Machine
English 10.2 CLEAN THE MACHINE 7. Extend the cutting line approximately 15 cm from the slots (22) of the coil protection. • Clean the machine after use with a moist cloth dipped in neutral detergent. • Do not use aggressive detergents or solvents to clean the plastic parts or handles. -
Page 12: Troubleshooting
English 10.4 REPLACE THE CUTTING LINE • Keep the machine away from corrosive agents such as garden chemicals and de-icing salts. NOTE • Secure the machine during transportion to prevent damage or injury. Clean and examine the machine for any Remove the remaining cutting line on the spool. -
Page 13: Technical Data
English Problem Possible Cause Solution Problem Possible Cause Solution The ma- The guard is not Remove the battery pack The line The machine is 1. Cut with the tip of the chine stops attached to the ma- and attach the guard to keeps used incorrectly. -
Page 14: Limited Warranty
(3) years against defects in materials, parts or workmanship. Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. -
Page 15: Exploded View
English EXPLODED VIEW No. Part No. Description No. Part No. Qty Description R0201011-00 AUXILIARY HANDLE R0201052-00 SPOOL & SPOOL COVER R0201051-00 KNOB R0201053-00 GUARD R0201010-00 BOLT...