Remove The Trimmer Head; Assemble The Trimmer Head; Transportation And Storage; Move The Machine - GreenWorks STE457 Operator's Manual

5.1"
(130 )
mm
=
10.5

REMOVE THE TRIMMER HEAD

1. Put the metal rod (26) in the specified angle transmission
hole (25) to fix the trimmer head.
2. Turn the trimmer head clockwise to loosen it. Do not
remove the spacer from the shaft.
10.6

ASSEMBLE THE TRIMMER HEAD

1. Put the metal rod in the specified angle transmission hole
to fix the trimmer head.
2. Assemble the trimmer head.
3. Turn the trimmer head counterclockwise to tighten it.
4. Remove the metal rod.
IMPORTANT
You must install the cut-off blade when you use the trimmer
head.
English
5.1"
(130 )
mm
=
11
25
Remove the battery pack from the machine before

transportation and storage.

11.1
26
When you move the machine, you must:
•
•
11.2
•
•
•
•
12
Type
Motor
No load speed
Cutting line diameter
Cutting path diameter
Feed Type
Weight (without battery
pack)
Battery model
Charger model
11
TRANSPORTATION AND
STORAGE
WARNING

MOVE THE MACHINE

Stop the machine.
Remove the battery pack.

STORE THE MACHINE

Remove the battery pack from the machine.
Make sure that children cannot come near the machine.
Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.

TECHNICAL DATA

Cordless, battery powered
2x24 V
6000±10% RPM
0.095" (2.4 mm)
14 in. /16 in. (356mm/
406mm)
Bump Feed
9.0 lbs (4.1kg)
BAG709 and other BAG
series
CAG812/CAG817 and other
CAG series
EN