MULTIQUIP PRO12C Operation Manual page 9

FUEL SAFETY (GASOLINE MODELS ONLY)
DANGER
 NEVER add fuel to the equipment if it is placed inside a
truck bed with a plastic liner. The possibility exists of
explosion or fi re due to static electricity.
FUEL
FUEL
 NEVER start the engine near spilled fuel or combustible
fl uids. Fuel is extremely fl ammable and its vapors can
cause an explosion if ignited.
 ALWAYS refuel in a well-ventilated area, away from
sparks and open fl ames.
 ALWAYS use extreme caution when working with
fl ammable liquids.
 DO NOT fi ll the fuel tank while the engine is running
or hot.
 NEVER overfi ll the tank, as spilled fuel can ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
 Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and fl ames.
 NEVER use fuel as a cleaning agent.
 NEVER smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
PRO12C HYDRAULIC MIXER • OPERATION MANUAL — REV. #0 (07/16/20) — PAGE 9
SAFETY INFORMATION
GENERATOR SAFETY
If using a generator to power the mixer, refer
to the applicable generator manual safety
information section.
ELECTRIC MOTOR SAFETY
(ELECTRIC MODELS ONLY)
NOTICE
 Operate the electric motor only at the specifi ed voltage
indicated on the nameplate.
 NEVER spray water onto the electric motor.
 ALWAYS disconnect the AC power plug from the power
source before moving the mixer.
 ALWAYS make sure the ON/OFF switch
on the electric motor is in the OFF position
when not in use and before inserting the
mixer's power plug into an AC receptacle.
POWER CORD/CABLE SAFETY
DANGER
 NEVER let power cords or cables lay in water.
 DO NOT use damaged or worn cables or cords when
connecting equipment to a generator. Inspect for cuts in
the insulation.
 NEVER grab or touch a live power
cord or cable with wet hands. The
possibility exists of electrical shock,
electrocution or death.
 Make sure power cables are securely connected.
Incorrect connections may cause electrical shock and
damage to the mixer.
CAUTION
 Ensure that cables and cords will not be tripped over or
trapped underneath the mixer.
NOTICE
 ALWAYS make sure that the proper power or extension
cord has been selected for the job.