MULTIQUIP PRO12C Operation Manual page 26

2. Turn the engine ON/OFF switch (Figure 29) to the
OFF position.
ENGINE SWITCH
Figure 29. Engine ON/OFF Switch (OFF)
3. Place the fuel valve lever (Figure 30) in the OFF
position.
FUEL VALVE
OFF
Figure 30. Fuel Valve Lever (OFF)
Emergency Shutdown
Push the emergency stop switch inward to the STOP
position (Figure 31).
EMERGENCY
STOP SWITCH
PUSH IN TO
STOP
Figure 31. Emergency Stop Switch (STOP)
PAGE 26 — PRO12C HYDRAULIC MIXER • OPERATION MANUAL — REV. #0 (07/16/20)
OFF
ON
LEVER
ON
P U
T O
S H
S T
O P
STOPPING THE MIXER (ELECTRIC MOTOR)
1. To stop the electric motor, press the red OFF/STOP
switch (Figure 32).
PRESS TO
STOP
Figure 32. Electric Motor ON/OFF Switch (Stop)
2. Disconnect the electric motor's extension cord from
the power source.
CLEANING THE MIXER
After each use, thoroughly clean the entire mixer as
described in the Maintenance section of this manual.
NOTICE
ALWAYS make sure the mixer drum is clean and free
of debris and dried material. NEVER allow material to
build up inside the drum.
Keep the drum, frame and wheels clean. Excess debris
(buildup of materials) can lead to premature metal fatigue.
OPERATION
OFF ON
START
STOP