MULTIQUIP PRO12C Operation Manual page 20

EMERGENCY STOP SWITCH
(GASOLINE ENGINE MODELS ONLY)
The engine emergency stop switch (Figure 10)
should be tested every time the engine is started. See
Starting the Mixer (Gasoline Engine) in the Operation
section for more information.
EMERGENCY
STOP SWITCH
Figure 10. Emergency Stop Switch
CAUTION
NEVER disable or disconnect the emergency stop
switch. It is provided for operator safety. Injury may result
if it is disabled, disconnected or improperly maintained.
PAGE 20 — PRO12C HYDRAULIC MIXER • OPERATION MANUAL — REV. #0 (07/16/20)
P U
T O
S H
S T
O P
PADDLE BLADE CHECK
Check for worn or defective paddle blades (Figure 11).
Make sure that all blades are adjusted properly. Refer to the
Paddle Blade Adjustment procedure (Figure 12). Replace
all defective or damaged blades immediately.
WORN RUBBER
CRACKS
Figure 11. Worn Paddle Blade
INSPECTION
MISSING
RUBBER