MULTIQUIP PRO12C Operation Manual page 8

Hydraulic plaster/mortar mixer, honda gx390rt2-qnb2 gasoline engine/teco westinghouse 5hp electric motor
Table of Contents

Advertisement

WARNING
 DO NOT place your hands inside the drum
while starting or operating this equipment.
 NEVER disconnect any emergency
or safety devices. These devices are
intended for operator safety. Disconnection of these
devices can cause severe injury, bodily harm or even
death. Disconnection of any of these devices will void
all warranties.
 Before operating the mixer, ensure that the safety grate
is in position and correctly fi tted.
CAUTION
 NEVER lubricate components or attempt service on a
running machine.
NOTICE
 ALWAYS keep the machine in proper running condition.
 ALWAYS ensure the mixer is on level ground before
mixing.
 Fix damage to the machine and replace any broken
parts immediately.
 DO NOT tip the mixer onto the drum mouth while the
drum is rotating.
 Ensure the drum is rotating while fi lling and emptying
the drum.
 ALWAYS store equipment properly when it is not being
used. Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
 ALWAYS deploy stabilizer jack stands prior to use.
PAGE 8 — PRO12C HYDRAULIC MIXER • OPERATION MANUAL — REV. #0 (07/16/20)
SAFETY INFORMATION
ENGINE SAFETY (GASOLINE MODELS ONLY)
DANGER
 Engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
 The engine of this equipment requires an adequate
free fl ow of cooling air. NEVER operate this equipment
in any enclosed or narrow
area where free fl ow of the
air is restricted. If the air
fl ow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
WARNING
 DO NOT place hands or fingers inside the engine
compartment while the engine is running.
 NEVER operate the engine with heat shields or
guards removed.
 Keep fi ngers, hands, hair and clothing away
from all moving parts to prevent injury.
 DO NOT remove the engine oil drain plug
while the engine is hot. Hot oil will gush out of the oil
tank and severely scald any persons in the general area
of the mixer.
CAUTION
 NEVER touch the hot exhaust manifold,
muffl er or cylinder. Allow these parts to cool
before servicing the equipment.
 Make certain the operator knows how to and is capable
of turning the engine OFF in case of an emergency.
NOTICE
 NEVER run the engine without an air fi lter or with a dirty
air fi lter. Severe engine damage may occur. Service the
air fi lter frequently to prevent engine malfunction.
 NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO12C and is the answer not in the manual?

This manual is also suitable for:

Essick seriesPro12e51cPro12e53cPro12e53-460vc

Table of Contents