Table of Contents
Advertisement
Message
"Command Error"
"Compressed Data Error."
"Data Storage Error"
"Error has occurred."
"Exceeded Max. Stored
Files"
"Exceeded Max. Stored
Pages"
Cause
An RPCS command error
occurred.
The printer detected corrupt
compressed data.
You tried to print a Sample
Print, Locked Print, Hold
Print, or Stored Print file, or
to store a file in the
Document Server when the
hard disk was
malfunctioning.
A syntax error, etc.,
occurred.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum file capacity was
exceeded.
While printing a Sample
Print, Locked Print, Hold
Print, or Stored Print file, the
maximum page capacity
was exceeded.
Messages Displayed When You Use the Printer Function
Solution
Check using the following procedure:
• Check if the communication
between the computer and the
machine is working correctly.
• Check if the correct printer driver
is being used.
• Check if the machine's memory
size is set correctly in the printer
driver.
• Check that the printer driver is the
most up-to-date version available.
• Check the connection between
the computer and the printer.
• Check that the program you used
to compress the data is
functioning correctly.
Contact your service representative.
Check that the PDF file is valid.
Delete unneeded files stored on the
machine.
Delete unneeded files stored on the
machine.
Reduce the number of pages to print.
175
Advertisement
Table of Contents
