Ricoh MP C407 Series User Manual page 169

Message
"Parallel I/F board has a
problem."
"Printer font error."
When using direct print from a memory storage device
Message
"Exceeded the limit value for
total data size of the
selected files. Cannot select
more files."
"Unable to access the
specified memory storage
device."
Cause
An error has occurred in the
IEEE 1284 interface board.
An error has occurred in the
font settings.
Cause
• The size of the selected
file exceeds 1 GB.
• The total size of the
selected files exceeds 1
GB.
• An error occurred
when the machine
accessed the memory
storage device or a file
stored on the memory
storage device.
• An error occurred
when the user used the
Direct printing function
to print from a memory
storage device.
Messages Displayed When You Use the Printer Function
Solution
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Contact your service representative.
Solution
Files or groups of files larger than 1 GB
cannot be printed.
• When the total size of the multiple
files that are selected exceeds 1
GB, select files separately.
• When the size of the selected file
exceeds 1 GB, print from a
memory storage device using a
function other than the Direct
printing function.
You cannot select files of different
formats at the same time.
Save the file to a different memory
storage device, and then print again.
167