Auto Disconnect For Extension Phone Pick-Up; Memory Full; Power Failure - VTech 914-916adl Operating Instructions Manual

ITAD OPERATION
down while pressing
desired speed.
There are 7 playback speeds. The
default speed is normal. Playback
speed will return to normal once you
exit the playback mode.
Auto Disconnect for Extension
Phone Pick-up
The ITAD will auto-disconnect the
telephone line if an extension phone
or the cordless handset accesses the
line.
Note: If the ITAD continues to record
after an extension phone or the
cordless handset accesses the line,
either press on the base or
press on the extension phone or
cordless handset.

Memory Full

900
MHz CORDLESS
914ADLi
MEMORY FULL
2 3
1 PUBLIC
FULL
THE LED WILL BE ON
MAILBOX
WHILE THE SYSTEM REMAINS
DIGITAL
LESS THAN 30 SECONDS
ANSWERING
POWER DEVICE
RECORDING TIME
IN USE
ERASE
CHARGE
ON
SPARE
BATT VOL
REPEAT STOP PLAY SKIP
• When the ITAD has less than 30
seconds recording time remaining,
the FULL LED will be illuminated.
• If the ITAD memory is full, it will
automatically default to ANSWER
OFF mode. The ITAD will answer a
call after 10 rings and "Memory full,
Please enter your security code" is
or to the announced. You may enter remote
operation mode by entering the
security code.
• If memory is full, any attempt to
record memos or OGM's will be
inhibited.

Power Failure

900
2
1
FULL
POWER
IN USE
CHARGE
SPARE
BATT
VOL
REPEAT STOP
• After a power failure, the FULL LED
will flash to notify you to set the day
and time.
• All the messages, OGM's and menu
settings (other than day and time) will
be retained.
• The ITAD will default to ANSWER
ON and Call Screening ON.
• Note that after power up, the ITAD
will have an initialization period,
during which, the ON and FULL
LEDS will flash. During this period,
you can still use the cordless phone.
32
MHz CORDLESS
914ADLi
POWER FAILURE
3
PUBLIC
THE LED WILL FLASH
AFTER POWER FAILURE
MAILBOX
OR CONNECTING THE
DIGITAL
ANSWERING
DEVICE
ADAPTOR.
ERASE
ON
PLAY SKIP