Handset Features; In Use Led; Low Battery Led; Phone Key / Flash Function - VTech 914-916adl Operating Instructions Manual

HANDSET FEATURES

900
MHz CORDLESS
LOW
IN USE
BATT
CHAN
1 2 3
ABC D E F
4 5 6
G H I J K L MNO
7 8 9
P R S T U V W X Y
* 0 #
TONE OPER
PROG MEM REDIAL

IN USE LED

• The IN USE LED lights when the
phone line is being used by the
handset.
• It flashes in cadence with an incom-
ing ring.
• It flashes quickly during PROGRAM
mode.

LOW BATTERY LED

• The LOW BATT LED will flash when
the handset battery is getting low
and needs to be recharged.

PHONE KEY / FLASH FUNCTION

• Press the PHONE key to make a
call.
• If you are currently on a call press-
ing PHONE flashes the line. This
would be used with a feature like call
waiting to answer your second call.

CHANNEL KEY

• Pressing the CHAN key when the
handset is in use will activate a chan-
nel change to the next free channel.
• This is used if you are experiencing
noise or interference on the current
channel.

OFF KEY

• Press the OFF key to exit all modes
of operation.

MEM KEY

• P r e s s t h e M E M k e y t o e n t e r
MEMORY mode.
• The sequence for dialing out a speed
dial number in memory is: PHONE,
MEM, Number Button (0-9).

PROG KEY

• Press PROG key to enter PRO-
GRAM mode. See Programming
Speed Dial Numbers for more de-
tails.

REDIAL KEY

• When you hear the dial tone, press-
ing the REDIAL key will dial out the
last number that was called on your
phone.
• It can also be used to store the last
number dialed into the speed dial
memory. See Storing a Redial
Number into Speed Dial for details.
TONE / KEY
• In PULSE dialing mode, this key is
used to switch to Temporary TONE
dialing mode.

VOLUME CONTROL

• Set Volume switch on the side of the
Handset to high (H) or low (L), de-
pending on your preference.
13