Handset Features - VTech GZ5838 User Manual

Handset features

SEL (select)
• Press to store a programming option, or to
• When the telephone is not in use, press to
• Press and hold for two seconds while in idle
• During a call, press to lower listening
• Press this button to make or answer a
• During a call, press to receive an
CHAN/REMOVE
• Switch to a clear channel while on a call .
• While handset is not in use, press and hold
PROG
• Press to enter programming mode while
8
store a directory entry .
/CID
display caller ID information .
mode to adjust ringer volume . A double beep
will sound at the lowest setting .
volume . A double beep will sound at the
lowest setting .
/FLASH
call .
incoming call if call waiting is activated .
to delete all records in the call log .
When viewing the call log, press to delete
the current record .
the handset is in idle mode .
www.vtechphones.com
/
• When the telephone is not in use,
press to display directory entries .
• Press and hold for two seconds
during idle mode to adjust ringer
volume . A double beep will sound
when the highest setting is reached .
• During a call, press to increase
listening volume . A double beep will
sound when the highest setting is
reached .
OFF
• During a call, press to hang up .
• While the handset is ringing, press to
silence the ringer .
• Press and hold for two seconds
while in idle mode to erase the
MISSED CALLS display .
• During programming, press to exit
without making changes .
REDIAL/PAUSE
• Press / FLASH, then press this
button to call the last number dialed .
-OR-
Press this button, then press
/FLASH to call the last number
dialed .
• While handset is not in use, press this
button twice to delete the last number
dialed from this telephone .
• While dialing or entering numbers into
the directory, press to insert a dialing
pause .