Table of Contents
Advertisement
6.4.1
Parameter settings of 1/1gang sensor/dimming actuator
Actuator settings
Fig. 18:
Actuator settings
Sensor settings
Fig. 19:
Sensor settings
System Manual 2CKA001473B9186
Commissioning
[1] Changing the name
[2] Deleting the channel
[3] Switching of the actuator via the button.
Dimming the actuator via the −/+ buttons
[4] Setting of the load connected to the actuator.
Selecting the function:
Automatic load detection
■
Inductive load
■
Dimmable LED/KLL
■
Incandescent lamp
■
[5] Setting the minimum brightness in % via the -
/+ buttons
[6] Setting the maximum switch-on brightness
during the day in % via the -/+buttons
[7] Setting the maximum switch-on brightness
during the night in % via the -/+ buttons
[8] Setting the switch-off delay in seconds
–
The -/+ buttons can be used to
specify, for example, how long
the light remains switched on
after the actuator has deactivated
the load.
[9] Setting the switch-on mode
–
The parameter specifies whether
the lamp switches on with the
previously set brightness or
always with maximum brightness.
[1] Changing the name
[2] Deleting the channel
[3] Selecting the rocker in the list view
│27
Advertisement
Table of Contents
