6.3.1
Settings – Overview of setup menus
6.3.1.1
P arameter s ettings of 1/1gang s ens or/s witc h ac tuator
Ac tuator s ettings
Fig. 17:
Actuator settings
Note
The function of the actuator can be specified after the allocation: Switch
actuator, heating operation, additional heating stage or trigger.
S ens or s ettings
Fig. 18:
Sensor settings
Product manual 2CKA001473B9185
Commissioning
Setting options per channel
[1] Changing the name
[2] Deleting the channel
[3] Switching the actuator via the button
[4] Selection of a different icon
[5] Setting the switch-off delay in seconds
–
The -/+ buttons can be used to
specify, for example, how long
the light remains switched on
after the sensor has deactivated
the load.
[6] Behaviour during faults
–
Display of information only. No
settings are possible.
[1] Changing the name
[2] Deleting the channel
[3] Selecting the rocker in the list view
│27