Table of Contents
Advertisement
6.3
Allocation of devices and definition of channels
The devices connected to the system must be identified, i.e. they are allocated to a room
according to their function and are given a practical name.
6.3.1
Add device
1. In the "Add devices" bar select the desired application and pull it via drag-and-drop into the
floor plan.
Fig. 12:
Dragging the application from the add bar
A pop-up window opens which lists all the devices that are connected to the bus and suitable for
the selected application (e.g. all blind actuators, if the blind application has been selected).
System Manual 2CKA001473B9186
The allocation is made via the allocation function of the Web-based
user interface of the System Access Point.
Commissioning
│22
Advertisement
Table of Contents
