Busch-Jaeger 6212/1.1-WL System Manual page 29

For all other devices it becomes available only after being linked with an actuator. The setting in
the list view is then made via the linking function of the Web-based user interface of the System
Access Point.
Fig. 21: Rocker setting after linking with actuator
NOTE
The parameter only functions when a time profile with the application "LED day /
night switchover" is available. The device (channel) must be linked with this
application.
System Manual 2CKA001473B9186
Icon of the application
Commissioning
[5] Selecting the function:
Control element
■
Dimming sensor
■
Staircase light sensor
■
Force-position sensor On/Off
■
Blind sensor
■
Blind force-position
■
Scene sensor (is visible only
■
when the "Scene sensor" has
been selected.
Long press of the button:
"Overwrite scene"/"Retain
scene")
│29