Table of Contents
Advertisement
8.4
Device settings
All settings of the device are carried out supported by text-controlled operator prompting. The
language, time and date have to be set first during initial commissioning.
Notice
Values which need to be changed flash and are displayed in grey in the
following illustrated examples.
During initial commissioning or re-commissioning after a reset or reset to factory settings, one of
the buttons must be pressed for 5 seconds to release the button lock.
The button lock can also be deactivated. See see chapter 8.6.5 "Button lock" on page 34.
Commissioning must be carried out anew after a reset. After initial commissioning or after a
reset, the device briefly displays the version number.
A detailed description of the individual operating steps for programming is contained in the
following sub-sections.
Notice
In the event of an incorrect entry, the menu button can be pressed in order to
return to the start of the selected menu item or menu level. After a renewed
actuation of the menu button, first there is a change to a higher level, up to the
display of the operating mode.
Product manual 2CKA001473B8291
Operation
│21
Advertisement
Table of Contents
