Linking An Actuator With An Additional Sensor - Busch-Jaeger 6212/1.1-WL System Manual

6.5.2

Linking an actuator with an additional sensor

Fig. 23: Linking an actuator with an additional sensor
1. On the working area select the second sensor [1] that is to be linked with the actuator.
2. Select the actuator [2] that is to be served by the sensor.
3. Press the arrow at the bottom right to take over the entries.
An additional blue connecting line indicates the link between the two devices. After the
transmission of the configuration the sensor can be operated directly locally.
System Manual 2CKA001473B9186
Commissioning
│32