Setup And Function - Busch-Jaeger 6212/1.1-WL System Manual

3

Setup and function

Fig. 1: Product overview
[1] Flush-mounted insert
[2] Sensor for sensor/dimming actuator, 1/1-gang
[3] Sensor for sensor/dimming actuator, 2/1-gang
[4] Cover frame (not included in scope of delivery)
[5] Rocker (not included in scope of delivery)
This device is a sensor/dimming actuator unit for decentralized flush-mounted installation. The
devices serve both as control element as well as actuator for the activation or dimming of
electric loads.
Sensor and actuator are combined in a flush-mounted insert [1]. The sensor and switching
channels have been pre-programmed at the point of delivery (button top/bottom: off/on;
2/1gang, via left rocker). However, this pre-configuration can be adjusted as required.
After connecting the load, it can be switched/dimmed directly on the control element.
Additional product features:
Green LEDs as light for orientation and status indication.
■
Exchangeable rockers with the corresponding icons
■
System Manual 2CKA001473B9186
Setup and function
│8