Busch-Jaeger 6212/1.1-WL System Manual page 28

Rocker settings
Fig. 20: Rocker settings
The following parameter is available immediately for pre-programmed devices.
System Manual 2CKA001473B9186
Icon of the application
Commissioning
[1] Changing the name
[2] Switching of the sensor via the button
[3] Setting the LED night/day switch-on
brightness in % via the -/+ buttons
– The parameter specifies how
strong the LED lights up
percentage wise during night/day.
[4] Selecting the LED operating mode:
Light for orientation: LED lights
■
up permanently
Status display: LED lights up
■
during actuation
│28