Advertisement
Quick Links
Advertisement
Related Manuals for Kendal Lighting Lopro KENAC21352SN
Summary of Contents for Kendal Lighting Lopro KENAC21352SN
- Page 1 (MODEL NUMBER:AC-21352)
- Page 3 Putting Your Fan Together HANGER BALL SCREW 1.Loosen the screw from the hanger ball and remove the pin, set screw and clevis pin from DOWNROD CLEVIS PIN FIG.1 down rod. (see fig 1) SET SCREW 2.Insert the down rod through the center opening HANGER BALL in the canopy, coupling cover and route the motor leads through the downrod.
- Page 4 Wiring Your Ceiling Fan OUTLET BOX Caution: To avoid possible electrical shock, GREEN WIRE be sure electricity is turned off at the main fuse box before wiring. RECEIVER 1. If you are not sure that the electrical box is grounded,contact a licensed electrician for advice.It must be grounded for safe operation.
-
Page 5: Installing The Light Kit
Installing The Light Kit 1. Remove the 3 screws from the light kit adapter. LIGHT KIT (see fig 13) ADAPTER 2. Remove the PC cover lens from LED light kit by SCREW SCREW FIG.13 removing the 3 screws. (see Fig.14) LIGHT KIT 3. - Page 8 TNA16041101...
-
Page 9: Remote Control Setting And Operation
REMOTE CONTROL SETTING AND OPERATION TRANSMITTER OPERATION Remove the battery cover from the remote control transmitter and install batteries, Replace the cover. Note : Use 2 1.5V/AAA batteries (included). Note : If not using for long period of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity. - Page 10 Remote Control Fan Speed And Light Functions. Fan speed 1 = minimum speed 2 = low speed 3 = medium low speed 4 = medium speed 5 = medium high speed 6 = high speed This button turns the fan off. Forward / Reverse button- This button controls the direction of the fan rotation .
Need help?
Do you have a question about the Lopro KENAC21352SN and is the answer not in the manual?
Questions and answers