Mitsubishi Electric AE-200A/AE-50A Instruction Book page 13

Item
Each group icon indicates the operation condition of the group. Move the cursor to the icon to display
its group name. Clicking the icon will bring up the operation screen.
The icons to indicate the operation conditions are shown below.
(1) Air conditioning unit group
Group icons
WT07139X01
ON
Interlocked
LOSSNAY ON *2 *8 LOSSNAY OFF
Energy-saving ON *5
Bright/Dark *9*10*11
(Yellow) (Gray)
Note: Besides the 4-way airflow unit icons, 2-way airflow or ceiling-suspended unit icons are also
available. Icons can be selected on the group settings screen, accessible via the Web Browser for
Initial Settings.
*1 Whether or not to display the filter sign can be set on the Basic System settings screen, accessible via the
Web Browser for Initial Settings.
*2 If the LOSSNAY unit is interlocked with the operation of Mr. Slim units, "Interlocked LOSSNAY ON" icon will
appear, even when the LOSSNAY unit is operated individually.
(Applicable M-NET adapter model: PAC-SF48/50/60/70/80/81MA-E)
*3 If a LOSSNAY unit is interlocked with the operation of indoor units in multiple groups, the LOSSNAY unit
may be in operation, even when the "Interlocked LOSSNAY OFF" icon is displayed.
*4 If any schedule setting is applied to a DIDO controller whose prohibition setting is enabled ([Allow
operations] is set to [No operations] on the group settings screen, accessible via the Web Browser for Initial
Settings), the "Schedule set" icon will appear, but the scheduled operations will not be performed.
*5 The "Energy-saving ON" icon will appear while the Peak Cut control is performed on the group or on the
outdoor unit that is connected to the group.
*6 The Occupancy/Vacancy status icon will appear only when [Show occupancy icon], [Show vacancy icon], or
[Show both icons] is selected in the [Occupancy sensor display] section under the [Display Format] section
of the Basic System settings screen, accessible via the Web Browser for Initial Settings.
*7 The Occupancy/Vacancy status icon will not appear if the remote controller in the group does not have an
occupancy sensor.
*8 The Occupancy/Vacancy status icon takes priority over the "Interlocked LOSSNAY ON" or "Interlocked
LOSSNAY OFF" icon.
*9 The Brightness/Darkness status icon will appear only when [Show bright symbol], [Show dark symbol],
or [Show both symbols] is selected in the [Brightness sensor display] section under the [Display Format]
section of the Basic System settings screen, accessible via the Web Browser for Initial Settings.
*10 The Brightness/Darkness status icon will not appear if the remote controller in the group does not have a
brightness sensor.
*11 The "Setback ON" icon takes priority over the Brightness/Darkness status icon.
*12 The "Starting up" icon will stay when the unit cannot be recognized after startup. Check for proper
connection of the air conditioning unit and proper group settings.
*13 The Hold function can be used on the AE-200A/AE-50A, but not on the AE-200E/AE-50E.
Description
OFF
Interlocked
Schedule set
*3 *8
Setback ON *11 Starting up
HOLD ON *13
13
Error Filter sign ON
*4 Schedule disabled
Occupied/Vacant
*12
*6*7*8
(Blue)
*1
(Gray)