Table of Contents
Advertisement
Item
Usage ratio for each month
Usage ratio for each day of
the week
Block name
Usage ratio for each block
Auto calc.
Annual target electric energy
for each block
WT07139X01
Enter the target usage ratios of the annual electric energy for each month.
Note: Each ratio must be between 0 and 100%.
Note: The total of the ratios must be 100%. If the total is not 100%, a window that shows
the current total value as shown below will appear and the setting will not be saved.
Note: When the ratios are entered, the values in the [Monthly target electric energy] field will
be calculated automatically, based on the value in the [Annual target electric energy]
field.
Enter the target usage ratios of the electric energy for each day of the week.
Note: The total of the ratios must be 100%. If the total is not 100%, a window that shows
the current total value as shown below will appear and the setting will not be saved.
Note: When the ratios are entered, the values in the [Monthly target electric energy] field
may change after being recalculated.
The names of all the registered blocks will appear.
Note: If the block name has not been registered, ["Block" + block number] will appear.
Enter the target usage ratios of the electric energy for each block.
Note: The ratios cannot be entered if the [Auto calc.] checkbox is checked. To enter the
desired ratios, uncheck the checkbox.
Note: The total of the ratios must be 100%. If the total is not 100%, a window that shows
the current total value as shown below will appear and the setting will not be saved.
Check the checkbox to automatically calculate the usage ratio of the electric energy and
the annual target electric energy for each block based on the indoor unit capacity.
The annual target electric energy for each block will appear after being calculated based
on the ratios in the [Usage ratio for each block] field and the value entered in the [Annual
target electric energy] field.
36
Description
Advertisement
Table of Contents
