Table of Contents
Advertisement
4-1-2. Checking the operation conditions of the groups in a given block
In the Block display of the Condition List screen, select a block to display the operation conditions (such as
operation mode, set temperature, and room temperature) of the air conditioning unit groups, LOSSNAY unit
(ventilator) groups, Air To Water (PWFY) unit groups, and general equipment groups in the block.
Update
Click to show the most
recent operation conditions.
Block selection
Group name
Group icons
The icons indicate the
operation conditions of
groups.
Click the icon to switch to
the operation screen.
Set temperature
Item
Block/Overview (Floor
Layout)/HWHP
Update
Batch Operations
Block selection
Group icons
Group name
Operation mode
Set temperature
Room temperature
Room humidity
Number of units whose filter
sign is turned on
*1
WT07139X01
Click [Block] to display the operation conditions of groups per block, click [Overview (Floor
Layout)] to display the operation conditions of all groups, and click [HWHP] to display the
operation conditions of HWHP (CAHV) unit groups.
Click to show the most recent operation conditions.
When [Auto] is selected, the operation conditions are updated automatically every minute.
Click to operate the units in all groups in a given block at once. (See section 4-1-5.)
Select a block you want to monitor.
Each group icon indicates the operation condition of the group. Clicking the icon will bring
up the operation screen.
The name of the group will appear.
The operation mode of the group will appear.
The set temperature of the group will appear.
Note: For Air To Water (PWFY) unit groups, the set water temperature will appear.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
Indoor unit return air temperature will appear.
Note: The temperature shown may be different from the actual room temperature.
Note: Whether to show or hide the room temperature can be set on the Basic System
settings screen, accessible via the Web Browser for Initial Settings.
Note: For Air To Water (PWFY) unit groups, the current water temperature will appear.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
The reading of the humidity sensor on the ME remote controller (North America: PAR-
U01MEDU, Europe: PAR-U02MEDA) will appear.
Note: If a ME remote controller (North America: PAR-U01MEDU, Europe: PAR-U02MEDA)
is connected to the group and the built-in humidity sensor is enabled, the reading of
the sensor will appear.
The number of units under the control of AE-200/AE-50 whose filter sign is currently
turned on will appear. Clicking "
4-4.)
Note: This item will not appear if the [Filter Sign Display] is set to [OFF] on the Basic
System settings screen, accessible via the Web Browser for Initial Settings.
15
Description
" will bring up the Filter Sign List screen. (See section
Batch Operations
Click to operate the units in
all groups in a given block at
once.
Block/Overview (Floor
Layout)/HWHP
Weekly schedule number
Indicates the weekly
schedule that is currently
effective.
Number of units in error
Number of units whose
filter sign is turned on
Room humidity
Room temperature
Operation mode
Advertisement
Table of Contents
